Cooker hood stops during use

Last updated 03/03/2023 08:12


  • Cooker hood stops during use

Applies to

  • Cooker hoods


1. Switch off the cooker and the hood, wait 15 minutes and switch the appliance back on.

This should give the hood sufficient time to cool down and reset the appliance.

2. Reduce the number of boiling saucepans.

The appliance is designed to absorb odours, not large amounts of steam.

3. Check if the filters are clean and replace them if necessary.

To keep your kitchen smelling fresh it is recommended that you replace the carbon filter every 3 to 4 months, depending on the cooker hood usage and type of cooking (fried, fatty food, steam etc.).

4. Make sure the suction from the hood is sufficient.

  • Check if the air is flowing out at the air outlet on the external wall.
  • If the re-circulation function is activated, check whether the carbon filters are correctly inserted.

5. Contact an Authorized Service Center.

Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.


  • Tripped safety switch
  • A large number of boiling saucepans
  • Dirty filters
  • The duct to the open air might be clogged or in the wrong size
Book a repair
Book a repair

Need to arrange a technician visit? Repairs in warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.

Spare parts & Accessories
Spare parts & Accessories

Find original spare parts for your appliance in our webshop and have them delivered directly to your door.