- Hood displays error message C or F
- Cooker Hood
The letter F indicates that the metal grease filters should be cleaned.
After 100 hours of operation the LED lights up continuously to indicate saturation of the metal grease filters.
If C appears in the display, the activated carbon filter should be cleaned or changed depending on the model.
After 200 hours of operation the LED flashes to indicate saturation of the activated charcoal filters.
H (on the diagram above) performs a reset of the Filter Saturation Alarm once filters have been maintained.
Press for approximately 2-3 seconds while the cooker hood is turned off.
Alternative control panel
Activating and deactivating the filter notification:
Filter alarm reminds to change or clean the charcoal filter and clean the grease filter
The filter indicator is lit up in white for 30 seconds if the grease filter must be cleaned.
The filter indicator flashes white for 30 seconds if the charcoal filter needs to be replaced or cleaned.
1. Switch on the control panel.
2. Make sure that the icons are turned off.
3. To activate or deactivate the charcoal filter notification touch for 3 seconds.
If the charcoal filter notification is activated flashes white five times.
If the charcoal filter notification is deactivated flashes white three times.
To reset the alarm: Touch the filter icon for 3 seconds.