Gas Hob displays F

Last updated 16/04/2021 14:06

Issue

  • One or more burners do not ignite
  • F appears in one or more of the displays
  • F comes on

Applies to

Touchsure Electronic Gas Hobs with touch controls


Resolution

Here is the process to reset burners if an F appears in the display - 

 

Power OFF using this button

 

 

 

Power ON using the same button

 

When hob display is illuminated, and F reappears touch the PAUSE button

 

WITHIN 3 SECONDS then touch the Hob2Hood button

 

 

When a 0 is seen in the display

 

 

The fault is reset, and you can now light the burners correctly

 

IMPORTANT: If there is still an issue please check that the Burner Cap (A) Burner Crown (B) are correctly fitted and the metal part of the Flame Safety Device (C) is clean (Use a moist soft cloth or sponge only)

 

 

If this does not resolve the issue, then call AEG Service 03445 611611




Book a repair
Book a repair

Out of warranty? Not a problem. We can arrange for a technician to repair your appliance for a fixed price where call out, parts and labour are covered without the worry of unexpected additional costs. Alternatively we can repair your appliance for a monthly subscription with a repair and care plan from Domestic & General Ltd.

Repairs for no more than £145 or £16.49 per month
Book a repair
Spare parts & Accessories
Spare parts & Accessories

Find original spare parts for your appliance in our webshop and have them delivered directly to your door.