- Dishwasher displays one of the following error codes: i50, i51, i52, i53, i54, i55, i56, i57, i58, i59, i5A, i5B (i5H), i5C, i5D, i5E, i5F
- My dishwasher is showing an error code and not washing
- integrated dishwasher
- freestanding dishwasher
1. Reset your appliance.
Turn off the appliance from the mains supply, wait 30 seconds and then switch it back on at the mains supply
2. Check your dishwasher filter and sump (see below) for signs of foam/suds & debris
- Make sure you clean all the filters
- Clear any foam/suds from the sump
- Turn on the dishwasher, select a suitable cycle and start it.
- If the cycle starts and operates normally, the problem has been resolved.
See the instructional video
If the above steps don't resolve the issue then a service visit by one of our approved service providers is recommended.
Tips for saving energy at home when using your dishwasher
With energy prices soaring, it’s never been a better time to rethink how you use the appliances in your home to save energy and money. Besides helping your household budget, it will also benefit the planet, reducing CO2 emissions. Here are some helpful tips on how to reduce energy when using your dishwasher
- Use the ECO program when dishwashing. It takes a bit longer, but the dishwasher doesn’t have to work as hard, which means it uses less energy. Compare it to if you run or walk 1km. Running is faster but you need to use a lot more energy. If you walk instead it takes longer, but you use much less energy. The same logic goes for the ECO program
- If you have an hourly electricity rate, do the dishes when the price is at its lowest
- If you have an old dishwasher, it will have a low energy class – you can save energy just by replacing it with a new one
See other helpful tips to save energy and money
- All i50 family error codes relate to a wash motor/pump malfunction