Dishwasher displays error code i60 / i61 / i69 / i6C

Last updated 28/10/2021 10:51

Issue

  • My dishwasher is showing error codes and not heating or drying
  • Dishwasher displays error codes i60 / i61 / i69 / i6C

Applies to

  • Integrated dishwasher
  • Freestanding dishwasher

Resolution

1. Make sure the water inlet water temperature is not exceeding 60°C at the connection point, as this will have an adverse reaction to the enzymes in the detergent and can give poor washing results

2. Reset your appliance:

  • Remove the plug for the dishwasher
  • Check your dishwasher filter and sump ( See below ) for signs of foam/suds & debris

 dishwasher filters disassembled

  • Make sure you clean all the filters 
  • Clear any foam/suds from the sump     
  • Plug it back in. Turn on the dishwasher, select a suitable cycle and start it.
  • If the cycle starts and operates normally, the problem has been resolved.


 If the above steps don't resolve the issue then a service visit by one of our approved service providers is recommended.

Cause

  • The temperature of the water inside the appliance is too high or a malfunction of the temperature sensor occurred.
Book a repair
Book a repair

Need to arrange a technician visit? Repairs in warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.

Spare parts & Accessories
Spare parts & Accessories

Find original spare parts for your appliance in our webshop and have them delivered directly to your door.