Water is flowing back into the dishwasher

Last updated 17/10/2019 10:47

Issue:

  • Water is flowing back into the dishwasher. The problem is caused by the drain hose.

Applies to:

  • Integrated dishwasher
  • Freestanding dishwasher

Resolution:

1. Ensure that the drain hose has been installed correctly.

Make sure that:

  • The length of the drain hose does not exceed 400 cm.
  • The drain inlet point must be between 40 and 85 cm.
  • The drain hose is not damaged, kinked or twisted.

2. Contact an Authorized Service Center.

If the above advices do not resolve the problem, we recommend requesting a visit by a service engineer.

Note: The multi-tablet function must be enabled after you select a cycle and will not be saved in the memory. 

Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.


Book a repair
Book a repair

Out of warranty? Not a problem. We can arrange for a technician to repair your appliance for a fixed price where call out, parts and labour are covered without the worry of unexpected additional costs. Alternatively we can repair your appliance for a monthly subscription with a repair and care plan from Domestic & General Ltd.

Repairs for no more than £145 or £16.49 per month
Book a repair
Spare parts & Accessories
Spare parts & Accessories

Find original spare parts for your appliance in our webshop and have them delivered directly to your door.