Clothes Not Drying / Clothes Still Wet At End Of Tumble Dryer Cycle

Last updated 19/02/2021 14:36

Issue

  • clothes not drying are still wet at the end of the cycle

Applies to

  • Washer dryer 
  • Tumble dryer

Resolution


 Do not overload the appliance.

  • Overloading can reduce the heat circulation around the clothing thus extending the drying time. 
  • de-tangle clothes before adding to the dryer to reduce drying time.
  • select the correct drying program for the items in the drum.


 Check if the filters are clean.

  • If the filters, condenser and/or heat exchange are dirty, it may be the reason why the machine is not heating up.
  • See the user manual for information on how to clean and maintain your appliance. Download user manual.
  • The filters may appear clean but still be blocked.
  • You can check the filters by holding them up against the light or under a tap and seeing whether  water can flow through them.
  • If no water passes through the filters, clean them and check them again.
  • If water will still not pass through the filters, replace them.
  • Filters and accessories are available via the Web shop 


 Avoid opening the door during the first 10 minutes of the drying cycle. (applies to a heat pump tumble dryer)

  • If the door is opened, heating will be delayed.
  • If the door is opened during a drying cycle, the drying time may be extended by up to 20–30 minutes each time the door is opened
  • The door must be closed during a drying cycle. Restart the cycle and keep the door closed.


 Check if the appliance is displaying an error code

  • The error message can be a code in the display, a flashing LED or a sequence of beeps.
  • If an error code is displayed, see the user manual for troubleshooting.

 

 Check whether the appliance is getting hot:

  • Firstly, clean the appliance and then start a timed cycle of at least 120 minutes with no load.
  • After one hour, open the door and check whether the drum is hot inside (with at least 20 minutes remaining on the display).
  • If the inside of the drum is hot, the heating system is working. In tumble dryers fitted with a heat pump, you can often also hear whooshing or sloshing noises from the appliance when it stops.
  • If the appliance is still not hot after an hour of the program, we recommend requesting a visit by a service engineer. 


 Check if the ambient temperature is between 5°C and 35°C.

  • If the ambient temperature is too low or too high, the tumble dryer may not operate correctly.
  • Place the dryer in a room which has a suitable temperature.
  • If the dryer is located in a room, make sure that the temperature of the room is between 5°C and 35°C.
  • If the room temperature is not within this range, the tumble dryer may not operate correctly and will not heat up.
  • Heat the room in which the tumble dryer is situated until it reaches a suitable temperature, or move the dryer to another room which is at a suitable temperature.


 Reset the appliance

  • Remove the plug from the socket, wait 3 minutes and then plug it in again.


  • If the above does not resolve the problem, request a visit by a service engineer. You can book a visit here
Book a repair
Book a repair

Need to arrange a technician visit? Repairs in warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.

Spare parts & Accessories
Spare parts & Accessories

Find original spare parts for your appliance in our webshop and have them delivered directly to your door.