Tumble dryer drying cycle takes too long

Last updated 08/04/2022 09:25

Issue

  • Tumble dryer drying cycle takes too long

Applies to

Condenser Tumble Dryers and Heat-pump Tumble Dryers

Resolution

If your condenser tumble dryer  is taking too long to complete the cycle you may wish to check the following.


Check that the fluff filter is clean and empty after each cycle. If the fluff filter is not emptied after each drying cycle then the drying cycle will be longer than normal.


The fluff filter is located at the base of the door opening. It can be lifted out.

Open the filter, it clicks open like a book.

Empty the fluff from the filter into the bin and if necessary, vacuum it out.

This can be removed and cleaned under running water.



The condenser unit can then be reinserted into its place.


If you dryer is a heat pump dryer the condenser unit does not pull out but can be cleaned with a vacuum cleaner if necessary. 

Also, if your drying cycle is taking too long check that you have not put too much laundry in the dryer. Different drying cycles allow for different capacities of laundry. 

Details of this can be found in your user manual and the table of programmes and maximum capacities will look like this. 

Check that the room temperature is not too cold or too warm. 

The room should be warmer than 5°C and lower than 35°C for the dryer to operate correctly.

If you found the following information helpful, please give us a thumbs up below. If this information did not resolve your question, all constructive feedback is welcome.


Book a repair
Book a repair

Need to arrange a technician visit? Repairs in warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.

Spare parts & Accessories
Spare parts & Accessories

Find original spare parts for your appliance in our webshop and have them delivered directly to your door.