Tumble dryer is leaking

Last updated 09/02/2021 06:18

Issue:

  • Water leaking on to floor around the dryer

Applies to:

  • Condenser dryer
  • Heat pump dryer

Resolution:

1. Ensure the dryer is standing level on the ground by adjusting the feet accordingly

  • Use a spirit level to check whether the machine is level on all its feet.
  • The appliance must be stable on a level, hard floor

2. Clean all filters and the condenser (if accessible) regularly and carefully as described in the user manual.

  • It is normal that lint forms during the drying process and it cannot be avoided. This process is very dependent on the load (e.g. new towels, fleece etc.).
  • Excess fluff can contribute to blockages that cause overflowing.

3. If connected directly to a drain (rather than drawer) ensure outlet hose is not kinked.

4. Ensure seals around the door and any access flap are free of fluff.

5. Ensure a room temperature higher than +5°C and lower than +35°C. Optimal room temperature to achieve best drying results is between 19°-24°C.

7. Contact an Authorized Service Centre.

If the above suggestions did not solve the problem, we recommend requesting a visit by a service engineer.

Book a repair
Book a repair

Need to arrange a technician visit? Repairs in warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.

Spare parts & Accessories
Spare parts & Accessories

Find original spare parts for your appliance in our webshop and have them delivered directly to your door.