When I open my AEG tumble dryer, there is a large amount of lint / fluff (video)

Last updated 17/03/2020 14:04


  • When I open my tumble dryer, there is a large amount of lint / fluff

Applies to:

  • Vented dryer
  • Condenser dryer
  • Heat pump dryer


1. Check the air circulation while cleaning.

2. Clean the filters in the door opening.

3. In case of the condenser or heat pump tumble dryer also clean the condenser / heat exchanger, located at the bottom of your appliance.

4. In case of the vented tumble dryer, check if there is unrestricted air flow through the vent hose and through any wall.

5. Contact an Authorized Service Center.

If the above suggestions did not solve the problem, we recommend requesting a visit by a service engineer.


  • It is normal that lint forms during the drying process and it cannot be avoided. This process is very dependent on the load (e.g. new towels, fleece etc.).
How to change the fluff filter of your tumble dryer:


Book a repair
Book a repair

Need to arrange a technician visit? Repairs in warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.

Spare parts & Accessories
Spare parts & Accessories

Find original spare parts for your appliance in our webshop and have them delivered directly to your door.