Washing machine displays error code C3

Last updated 15/09/2021 09:27

Issue

  • Washing machine displays error code E30, E31, E32, E35, E38, C3 or emits 3 beeps.

Applies to

  • Front loader washing machine
  • Top loader washing machine
  • Washer-dryer

Resolution

  • Clean the pump and fluff filter. Then start a hot wash without adding any soap powder to clean out the drainage system. 
  • Check for a blocked drain.
  • Check the hose connected to the sink trap, and check if the sink is draining normally to rule out blockage.
  • Check whether the drains are draining satisfactorily. Try a wash with the drain hose in a bowl or sink.  
  • If the above steps don't resolve the issue then a service visit by one of our approved service providers is recommended.

Cause

  • Water inlet valve defective
  • Pressure switch/sensor defective
  • Drain pipe blocked up
  • Blocked/dirty filter
  • Drain pump defective
Find your User Manual
Find your User Manual

Solve problems and find instructions and other documentation for your product.

Book a repair
Book a repair

Need to arrange a technician visit? Repairs in warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.