Congratulations on your purchase of an AEG 8000 Cordless Cleaner. This cordless cleaner not only provides powerful responsive suction to get floors and other areas thoroughly cleaned, it also has a robust battery that delivers up to 60 minutes of runtime*
The AEG 8000 Cordless Cleaner also has a convenient wall mount for charging and secure storage.
We know you’re excited to unpack and use your new versatile cleaning machine. So, let’s start with some simple steps on how to easily assemble and charge your new AEG 8000 Cordless Vacuum Cleaner.
*Based on internal tests (2021) on handheld unit on min mode according to IEC 62885-4
STEP #1 - VERIFY THE BOX CONTENTS
Take all the contents out of the box and verify you have the following:
1. UltimatePower multi-surface nozzle
2. UltimatePower hard floor nozzle
3. BedProPower™ + nozzle
4. PetPro nozzle
5. Battery pack
6. Handheld unit
7. Telescopic tube
8. Wallmount charging unit
9. Small dusting brush
10. Delicate dusting brush
11. Short crevice
12. Angle joint
*Colours shown on the packaging and in advertisements may not be the same as the item you purchased, actual colours vary per model.
** The nozzles and accessories shown on the packaging and in advertisements may vary based on country specific model.
Mount the wall-mount charging unit with two screws and plug in the power adapter into the bottom of the wall mount charging unit.
Attach the battery to the handheld unit, and the handheld unit to the telescopic tube.
Attach the UltimatePower multi-surface nozzle to the end of the telescopic tube.
Place the fully assembled cleaner into the wall mount charger, and charge for 2.5hrs before use.